A Comparison of Three Measurement Models for the Wheel-Mounted MEMS IMU-Based Dead Reckoning System

  • 发布时间:[2022-04-22] 来源:[学院] 点击量:[76299]
作者 Wu, Yibin; Niu, Xiaoji; *Kuang, Jian
来源出版物 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY  : 70  11  11193-11203  DOI: 10.1109/TVT.2021.3102409 出版年: NOV 2021 
摘要: A self-contained autonomous dead reckoning (DR) system is desired to complement the Global Navigation Satellite System (GNSS) for land vehicles, for which the odometer-aided inertial navigation system (ODO/INS) is a classical solution. In this study, we use a wheel-mounted MEMS IMU (Wheel-IMU) to substitute the odometer, and further, investigate three types of measurement models, including the velocity measurement, displacement increment measurement, and contact point zero-velocity measurement, in the Wheel-IMU based DR system. The measurement produced by the Wheel-IMU along with the non-holonomic constraint (NHC) are fused with INS through an error-state extended Kalman filter (EKF). Theoretical discussion and field tests illustrate the feasibility and equivalence of the three measurements in terms of the overall DR performance. The maximum horizontal position drifts are all less than 2% of the total travelled distance. Additionally, the displacement increment measurement model is less sensitive to the lever arm error between the Wheel-IMU and the wheel center.

版权所有: 武汉大学卫星导航定位技术研究中心 联系地址: 中国·武汉市珞瑜路129号 邮编: 430079 E-mail:gnsscenter@whu.edu.cn Tel/Fax:027-68778971/68778971(办公室) 技术支持:武汉楚玖科技有限公司